THERMAL-BREAK ALUMINUM WINDOWS
Thermal-break aluminum windows need whole-window evidence.
Compare documented casement and sliding routes without treating a thermal barrier as proof of completed-window performance. Frame, glass, spacer, seals, size and installation must be reviewed together.
Рассмотреть проект ↗
ВЫБОР ДЛЯ ПРОЕКТА
Выбирайте по ведомости проёмов.
Окончательные параметры подтверждаются после проверки.
- Whole-window thermal target and calculation basis
- Opening type, dimensions and exposed elevation
- Glass build-up, spacer and solar-control requirement
- Air, water and structural evidence for the proposed configuration
- Installation interface, perimeter sealing and drainage
ДОСТУПНЫЕ ВАРИАНТЫ
ПРОВЕРКА ДОКАЗАТЕЛЬСТВ
Что запросить до утверждения.
- 01Proposed frame and sash section
- 02Thermal-barrier and glazing specification
- 03Applicable whole-window calculation or test report
- 04Differences between tested and proposed units
- 05Approved sample and configuration schedule
ПРОВЕРКА ПРИМЕНЕНИЯ
Типовые вопросы проекта
Residential exterior openings
До выбора подтвердите открывание, размер и доказательства.
Hotel and apartment schedules
До выбора подтвердите открывание, размер и доказательства.
Hot-climate solar-control reviews
До выбора подтвердите открывание, размер и доказательства.
Projects comparing casement and sliding routes
До выбора подтвердите открывание, размер и доказательства.
ВОПРОСЫ ПОКУПАТЕЛЯ
Краткие ответы до проверки.
Does a thermal break guarantee a specific U-value?
No. A whole-window value depends on the complete frame, glass, spacer, seals, size and calculation or test basis.
Can one test report cover every window size?
Not automatically. Check the tested specimen, method, opening type and differences from the proposed unit.
Should hot-climate projects review SHGC as well as U-value?
Yes. Conductive heat transfer and solar gain are separate design questions that must be coordinated with the glazing route.
ПРОДОЛЖИТЬ ПРОВЕРКУ