THERMAL-BREAK ALUMINUM WINDOWS
Thermal-break aluminum windows need whole-window evidence.
Compare documented casement and sliding routes without treating a thermal barrier as proof of completed-window performance. Frame, glass, spacer, seals, size and installation must be reviewed together.
مراجعة المشروع ↗
اختيار المشروع
اختر من جدول الفتحات.
لا تُعتمد التفاصيل النهائية إلا بعد مراجعة مخولة.
- Whole-window thermal target and calculation basis
- Opening type, dimensions and exposed elevation
- Glass build-up, spacer and solar-control requirement
- Air, water and structural evidence for the proposed configuration
- Installation interface, perimeter sealing and drainage
المسارات المتاحة
فحص الأدلة
ما يجب طلبه قبل الاعتماد.
- 01Proposed frame and sash section
- 02Thermal-barrier and glazing specification
- 03Applicable whole-window calculation or test report
- 04Differences between tested and proposed units
- 05Approved sample and configuration schedule
مراجعة التطبيق
مناقشات المشروع الشائعة
Residential exterior openings
أكد نوع الفتح والمقاس والأدلة قبل الاختيار.
Hotel and apartment schedules
أكد نوع الفتح والمقاس والأدلة قبل الاختيار.
Hot-climate solar-control reviews
أكد نوع الفتح والمقاس والأدلة قبل الاختيار.
Projects comparing casement and sliding routes
أكد نوع الفتح والمقاس والأدلة قبل الاختيار.
أسئلة المشتري
إجابات مختصرة قبل المراجعة.
Does a thermal break guarantee a specific U-value?
No. A whole-window value depends on the complete frame, glass, spacer, seals, size and calculation or test basis.
Can one test report cover every window size?
Not automatically. Check the tested specimen, method, opening type and differences from the proposed unit.
Should hot-climate projects review SHGC as well as U-value?
Yes. Conductive heat transfer and solar gain are separate design questions that must be coordinated with the glazing route.
متابعة المراجعة