INTERIOR ALUMINUM SLIDING DOORS
Slim aluminum sliding doors for interior project openings.
The currently documented Cavorlen sliding-door routes are interior partition systems. They are not presented as exterior façade doors, and every opening still requires measurement, support, glass and hardware review.
Review a project ↗
项目选型
依据门窗表选型，而不是依据材料口号。
所有方案采用同一项目基础；最终系统、尺寸、玻璃、五金、表面处理和性能仅在授权评审后确认。
- Interior location and opening dimensions
- Panel count, synchronization and clear passage
- Floor-track or top-hung structural route
- Tempered glass, privacy and appearance
- Casing, wall thickness, soft close and maintenance
已记录产品路径
证据核验
批准前采购方应索取的资料。
- 01Measured opening and wall build-up
- 02Panel, track and support drawing
- 03Glass and hardware schedule
- 04Approved finish and glass sample
- 05Installation, adjustment and maintenance method
应用评审
常见项目沟通内容
Living-room internal partitions
选择最终配置前，确认开启方式、尺寸、暴露条件、接口与证据。
Kitchen and bathroom openings
选择最终配置前，确认开启方式、尺寸、暴露条件、接口与证据。
Apartment and hospitality interiors
选择最终配置前，确认开启方式、尺寸、暴露条件、接口与证据。
Wide internal doorways
选择最终配置前，确认开启方式、尺寸、暴露条件、接口与证据。
采购方问题
详细评审前的简要回答。
Can these doors be installed in an exterior wall?
No. The two currently documented systems are restricted to interior partition use.
When is a top-hung route appropriate?
Only after the overhead structure, panel weight, hardware loading and installation tolerance are verified.
Are casing and soft-close hardware standard?
They are configuration-dependent options and must be identified in the approved scope and sample.
继续评审