INTERIOR ALUMINUM SLIDING DOORS
Slim aluminum sliding doors for interior project openings.
The currently documented Cavorlen sliding-door routes are interior partition systems. They are not presented as exterior façade doors, and every opening still requires measurement, support, glass and hardware review.
Review a project ↗
PROJECT SELECTION
Choose from the opening schedule—not a material slogan.
Use the same project basis for every route. Final system, size, glass, hardware, finish and performance are confirmed only after authorised review.
- Interior location and opening dimensions
- Panel count, synchronization and clear passage
- Floor-track or top-hung structural route
- Tempered glass, privacy and appearance
- Casing, wall thickness, soft close and maintenance
DOCUMENTED ROUTES
40×18 synchronized three-panel door
Wide interior route with approximately two-thirds passage and floor-track or top-hung options.
Review documented configuration →0240×65 slim interior sliding door
Value-led interior partition route for kitchens, bathrooms and smaller openings.
Review documented configuration →EVIDENCE CHECK
What buyers should request before approval.
- 01Measured opening and wall build-up
- 02Panel, track and support drawing
- 03Glass and hardware schedule
- 04Approved finish and glass sample
- 05Installation, adjustment and maintenance method
APPLICATION REVIEW
Common project conversations
Living-room internal partitions
Confirm opening type, size, exposure, interfaces and evidence before selecting the final configuration.
Kitchen and bathroom openings
Confirm opening type, size, exposure, interfaces and evidence before selecting the final configuration.
Apartment and hospitality interiors
Confirm opening type, size, exposure, interfaces and evidence before selecting the final configuration.
Wide internal doorways
Confirm opening type, size, exposure, interfaces and evidence before selecting the final configuration.
BUYER QUESTIONS
Short answers before detailed review.
Can these doors be installed in an exterior wall?
No. The two currently documented systems are restricted to interior partition use.
When is a top-hung route appropriate?
Only after the overhead structure, panel weight, hardware loading and installation tolerance are verified.
Are casing and soft-close hardware standard?
They are configuration-dependent options and must be identified in the approved scope and sample.
CONTINUE THE REVIEW